Poduct comment::«Very good, very precise easy to install.(ML)»
Status : Selling To buy this product please visit our store, following the link
Engine temperature protector for cars
This device is essential to save the engine live.
The overheat is the most frequent cause of destroy car engines.
The red Light or original indicator generally only advice after damage.
The TAU2 do not need open coolant circuit, only must touch the probe with engine.
So easy to install as connect 12v, ground, and probe.
Economic, small and efficient.
Login
You enter the configuration mode by pressing the center button for 3 seconds and you will see:
Set = Entering Setup
-06 = Product version
Use the up and down keys to choose what you want to change and press the center button.
Change the values with the up and down buttons. When you finish the middle button again.
Critical Temperature
Choose the critical temperature for your car considering that:
1-If the critical temperature is 97 ° c (206.6 ° f), it is warned from 98 ° c (208.4 ° f)
2-If the critical temperature is 97 ° c (206.6 ° f), the cut is from 104 ° c (219.2 ° f)
Cooling Fan:
You must change this value so that the led lights up next to the electro
0 = With the electro switch off there is 12v in the cable
1 = With the electro shutdown there is 0V in the cable
Centigrade or fahrenheit:
Grados:
0=Show in centigrade degrees
1=Show in fahrenheit degrees
Bright:
Change the brightness of screen.
Delay:
Delay: Is a time in seconds between the shutdown condistion and real shutdown.
Lda:
Do Not touch !!!.
END
Save the changes and finish the configuration by pressing the central button.
